Hello all,
this is some kind of "off topic"… I bought a USB mic (Mc Crypt EM-7U USB) to record (and stream) audio – like a babyphone does.
The setup:
- Raspberry Pi with most actual version of raspyfi
- Mc Crypt EM-7U USB
- Edimax EW-7811Un WLAN
All this works fine. The audio is recorded and streamed but the quality of the recorded audio is waste as you can hear here:
https://soundcloud.com/christian-aretz/recording-test
What I checked:
- The USB mic works great on Mac and Windows. So it's not damaged.
- I chose a longer USB-cable to have the microphone in a longer distance to the raspberry. Same result.
- I chose a different power supply and even a battery pack. Same result.
- I started with a different OS (wheezy raspbian). Same result.
- I configured the USB ports to USB 1.1. Same result.
- I tried different "Fix USB audio…." hints. Always still the same results
- I chose a LAN cable instead of WLAN. Same results.
Does anyone have an idea what I could try next? Or does anyone also have problems with this device? (I found an article where one used it without problems on a raspberry).
Thank you so much for your help.
Greetings from Berlin.
Christian
It could be that the microphone doesn't get enough power from the usb port you can try to feed it from an other source or via GPIO's so the power comes straight from the power supply.
And it would be helpful to have the revision number of your R-pi as the different versions had a little change on the usb port rev 2 should give more power to the connected devices than rev1
Most Users Ever Online: 200
Currently Online:
5 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Gyp: 82
yoghurtlidlicker: 37
PaulM: 36
icai: 35
Derek: 29
Karsten: 27
tc-fi: 22
Ronaldo: 21
ENSen: 21
chriz: 20
Member Stats:
Guest Posters: 3619
Members: 569
Moderators: 0
Admins: 1
Forum Stats:
Groups: 4
Forums: 10
Topics: 469
Posts: 13163
Newest Members: polo2016, dongdong8, wlpwlp, Sager, ninestab123, lmx66, lmx, jlgg, chenyan, guoyanying
Administrators: admin (401)